Construction Site Risk Identification Checklist


Construction Site Risk Identification Checklist

Factors to be taken into account:-


  • Have all substances on site been assessed (COSHH) for safe use?
  • Is the plant and machinery being used for any particular task suitable for the task?
  • Is the plant and machinery suitable to the environmental conditions and terrain in which they are used?
  • Are there any foreseeable abnormal situations which may arise, such as potential misuse of any materials or equipment and fluctuating operating conditions (e.g., during times of peak programmed works)?
  • Is there potential for injury from moving parts of plant or building fixtures, such as risks of entanglement, crushing, trapping, cutting, stabbing, puncturing, shearing, abrasion, tearing and stretching?
  • Is there potential for injury due to manual handling forces used, such as lifting, pulling, pushing, holding, carrying and pressing? If so have workers adequate manual handling training?
  • Is there potential for the generation of hazardous conditions due to factors such as pressurised content, electricity, noise, radiation, friction, vibration, fire, explosion, temperature, moisture, vapour, gases, dust, ice, or hot or cold parts?
  • Could the failure of plant result in the loss of contents, loss of load, explosion, fragmentation or collapse of parts?
  • Are there suitable safety devices and emergency back-up arrangements?
  • Are current control systems adequate, such as guarding, power isolation, noise insulation and ventilation or fume extraction systems?
  • Is there potential for falling objects or persons?
  • Is the condition, maintenance and repair of plant, tools and equipment adequate?, Are there daily/weekly inspections?
  • Have the ergonomic needs of workers undertaking tasks (such as heights of work benches and adjustability of seating) been addressed?
  • Have safer alternate means of carrying out the required task or achieving the required result been investigated and implemented?
  • Could the location of plant, equipment, substances and fixtures impede work procedures?
  • Is the lighting adequate?
  • Have hazardous elements been segregated (such as electricity and water, and incompatible chemicals)?
  • Have fuel storage tanks suitable spill protection?
  • Has the potential for inadvertent movements or occurrences (such as accidental operation of plant) been accounted for?
  • Are the current work systems (e.g. whether more or fewer people should be involved and whether work procedures need to be revised) appropriate?
  • Do workers have the necessary skills and qualifications to carry out their work?
  • Are there safe work method statements for the tasks required?
  • Are there designated pedestrian walkways, material delivery and storage areas?
  • Work Method Statements and Risk Assessments should be checked to ensure any findings from inspections are added or amendments are noted and the information transmitted to workers.

This checklist is extracted from our Health and Safety Management Manual available HERE

Builders Risk Assessment
© Dtje |

Related posts